Product Description
It is composed of several parallel and vertical corrugated Corrugated metal sheet, corrugated sheet is provided with small holes (or as needed without hole), corrugated angle of about 900, corrugated channels formed into 450 or 300 angle with the vertical direction. Two adjacent corrugated plate channel 900, two upper and lower plate corrugated packing rotating 900 stacked, connected with the flange in smaller diameter tower, make corrugated packing as a whole disc diameter, slightly less than the diameter of the tower. VS In the tower of larger diameter, each plate corrugated packing is divided into several blocks, through the manhole in the tower, the worker split joint a complete disc in the tower, the upper and lower two disk packing corrugated plate rotating 900 installation for the fluid mixing in the tower.
Advantage
Metal mesh filler is the world's most widely used high-performance filler, the main advantages are:
1 Theoretical plate number high, flux, pressure reduction;
2 Low load performance is good, the number of theoretical plates increases with the decrease of gas load, and there is almost no low load limit;
3 Operational flexibility;
4 Magnification effect is not easy;
5 To meet the precision, large, high vacuum distillation device requirements. Difficult to isolate the system, heat-sensitive products and high purity products, distillation provides a favorable condition.
Specification
| Type(mm) | Wave Crest Height (mm) | Specific Area (m2/m3) | Hydraulic Diameter dh/mm | Incline Angle o | Void Rate % |
| 125Y | 24 | 125 | 31.5 | 45 | 98.5 |
Application
1 Production strength, the number of theoretical plates less precision distillation
2 Heat-sensitive, difficult to separate the vacuum distillation, especially the pressure is less than 7KPa vacuum distillation
3 Separation of isotopic mixtures and isomeric mixtures
Product details
Product Tags:
|
|
High Performance Filler Metal Structured Packing Pressure Reduction Flexibel Operation Images
|
